1. Specifications and detection methods of titanium flanges
Titanium flange is a part made of non-ferrous metal titanium or titanium alloy, which connects the pipe to the pipe, and is connected to the pipe end.
The titanium flange has holes, and the bolts make the two flanges tightly connected. The flanges are sealed with gaskets. Flange pipe fittings refer to pipe fittings with flanges (flanges or splices).
It can be formed by threaded connection or welding. The flange connection consists of a pair of flanges, a gasket and bolts and nuts. The gasket is placed between the sealing surfaces of the two flanges. After tightening the nut, the specific pressure on the surface of the gasket reaches a certain value and then deforms, and fills the unevenness on the sealing surface, making the connection tight and leak-proof.
According to the structure type, there are integral titanium flange, butt welded titanium flange, loose titanium flange and threaded titanium flange.
2. Product specifications
Surface: forged surface, rolled surface, polished surface, polished surface
Specifications: Various specifications are produced according to flange standards, and non-standard flanges can also be produced according to customer drawings.
3. Delivery status
Machined smooth
4. Production method
Free forging, die forging, precision forging, welding
5. Detection method
According to customer needs for radiographic testing, coloring, flaw detection, water pressure test and other tests.
6. Material
TA1 (Grade 1), TA2 (Grade 2), TC4 (Grade 5)
Titanium alloy flange
7. Performance standards
TA1 / Gr1, TA2 / Gr2, TC4 / Gr5, Grade7, Grade9, Grade12
8. Standard value
| Grade | Al | V | N.max | C.max | H.max | Fe.max | O.max | Margin (single) max | Margin (total) max |
| TA1 | 0.03 | 0.08 | 0.015 | 0.20 | 0.18 | 0.1 | 0.40 | ||
| TA2 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | 0.1 | 0.40 | ||
| TC4 | 5.5-6.75 | 3.5-4.5 | 0.05 | 0.08 | 0.015 | 0.40 | 0.20 | 0.1 | 0.40 |
| Mechanical Performance Reference Standard | ||||
| Grade | Mechanical properties at room temperature, not less than | |||
| Tensile strength | Yield Strength | Elongation | Rate of reduction in area | |
| TA1 | 240 MPa | 170MPa | 25% | 30% |
| TA2 | 345 MPa | 275MPa | 20% | 30% |
| TC4 | 895MPa | 825MPa | 10% | 20% |
