On-line Diameter Measurement Of Titanium Alloy Round Tube

Titanium alloy round tubes are now very practical. The current measurement of titanium alloy round tubes can be accurately measured online using photoelectric calipers to ensure measurement accuracy on the production line.
In the production of titanium alloy round pipes, the titanium alloy round pipes are formed by multi-stage forming with a diameter, high frequency welding, regular sawing, straightening, and finally become a finished pipe. In modern industrial production, there are certain requirements for the quality and size of the finished pipe, and there are certain specifications for the deviation of the outer diameter of the titanium alloy round pipe.
In traditional methods, manual measurement is often performed with pallets in production. The on-line production speed of titanium alloy round tubes reaches tens of meters per minute. In such a high-speed production line, manual measurement of the outer diameter of the steel pipe is not only unsafe, but also difficult to measure. If the deviation cannot be detected in time or the measurement is not accurate, a lot of waste products will appear, causing great economic losses.
The photoelectric caliper series products can solve this problem, realize the online non-contact non-destructive detection of the diameter of the titanium alloy round tube, and control the diameter of its products. The caliper is equipped with an out-of-tolerance alarm system for the production of titanium alloy round tubes in the production line. Carry out excessive online alarm.
The caliper can automatically measure the outer diameter of the titanium alloy round tube and display it on the LED display in time. The display can also be externally connected so that the production operator can view and correct the production process parameters in time, and can be equipped The software system performs data analysis and storage to provide accurate data for the staff, thereby ensuring the production quality of the product, improving production efficiency, and reducing the waste generated by the waste of raw materials.
Titanium alloy round tubes have different outer diameters, so they have developed a variety of photoelectric calipers to meet the needs of rolling production. The measurement range of the photoelectric calipers is based on the specifications of the titanium alloy round tubes produced. Customized to meet the online measurement of all titanium alloy round tubes in production.
The photoelectric caliper is applied to the online measurement of the outer diameter of the titanium alloy round tube. The main part of the caliper is installed on the rolling site to ensure the online measurement of the outer diameter. The measurement range can be adjusted to accommodate a variety of titanium alloy rounds. The outer diameter of the tube is measured.
The photoelectric caliper is used in the online detection of the outer diameter size to achieve high-quality measurement. The measurement range can be customized according to needs. The photoelectric caliper can also be applied to various steel rolling sites, round steel, alloy steel, carbon steel On-line testing of various steels, etc., on-line measurement and off-line sampling can be performed on wire rod pipes.
Photoelectric calipers are used for online measurement of titanium alloy round tubes, which effectively reduces the cost of single-piece inspection after production, and can effectively save the loss of raw materials and reduce personnel needs. It can perform online detection of high-temperature titanium alloy round tubes. The material and temperature of the measured object have no effect on the measurement results. The photoelectric caliper can adapt to various working conditions and display various parameters required by the process in detail.