Prevent dust and dirt from entering the interior of the CNC vertical lathe. There are generally oil mist, dust and even metal powder in the air in the CNC vertical lathe cnc machining shop. Once they fall on the circuit board or electronic device in the CNC system, it is easy to cause components .The insulation resistance decreases, and even the components and circuit boards are damaged. Check whether the cooling fans on the CNC cabinet are working properly. Check whether the air duct filter is blocked every six months or every quarter. If too much dust accumulates on the filter and not cleaned up in time, the temperature in the CNC cabinet will be too high. Generally, the CMOSRAM storage device is provided with a rechargeable battery maintenance circuit in the CNC system to ensure that the memory content of the system can be maintained when the system is not powered. Under normal circumstances, even if it has not failed, it should be replaced once a year to ensure that the system works normally. The battery replacement should be carried out under the power supply state of the CNC system to prevent the information in the RAM from being lost during the replacement.

Because the current technology of linear motors driving linear three-axis is not mature, linear motors still have many shortcomings, such as high price, large heat generation, and poor transmission stability. CNC vertical lathe introduces the cost of manufacturing linear motors is very expensive, so the price is also expensive. Because the linear motor is fast, it will generate a certain amount of heat during high-speed movement. The faster the linear motor, the higher the heat generated, so the linear motor driven linear axis device must be equipped with a cooling system. CNC vertical lathes are widely used in the processing of box parts, shell parts, disc parts, and other parts in the military, aerospace, automobile, mold, machinery manufacturing and other industries. The parts can automatically complete the four-sided machining after one clamping Multi-spindle machining such as milling, boring, drilling, expanding, reaming, and tapping.

How to debug the CNC vertical lathe:

  • 1. Fill the oil tank of the CNC vertical lathe with oil. When the oil is filled with the hydraulic pump, link the shaft joint by hand. If the oil is discharged from the oil outlet of the pump, no bubbles will stop. For pumps with unloading ports, fill the pump casing with oil.
  • 2. After confessing that the hydraulic system has been purified to meet the standards, the CNC vertical lathe participates in the regulated medium to the fuel tank. When participating in the media, it must be filtered, the accuracy of the filter element must meet the requirements, and it must be tested and confirmed.
  • 3. Carry out loading test under the premise of normal empty operation. Loading can use the execution organization to move to the end position.
  • 4. Check all parts of the hydraulic system and confirm that the equipment is reasonable and correct.