The product technology of the finished titanium tube in the titanium container is the core technology recognized by the world in the field of titanium container production. Because of its very strict requirements on precision tolerance, mechanical properties, surface roughness, brightness, hardness and other indicators, it has become a unique top product in the titanium industry. At present, there are the following misunderstandings about the precision titanium of titanium containers on the market:
1. Titanium container finished titanium tube is ultra-thin stainless steel with titanium or titanium container with thickness less than 0.1mm with titanium element.
This is the misunderstanding of most people’s understanding of the finished titanium tube of the titanium container. The finished titanium tube of the titanium container can be graded for precision control, which can strictly meet the needs of different users. It pursues quality stability, high precision, and mechanical properties that require high precision. Only from the thinness of its products The finished titanium tube is one-sided.
2. With advanced twenty-roller Sendzimir mill, it can produce titanium tubes and finished products of titanium tubes and titanium plates.
The advanced rolling mill equipment is indeed the key unit for the production of finished titanium tubes, which plays an important role in the surface quality, thickness tolerance and mechanical properties of the finished titanium tubes, but it cannot be said that the rolling mill is the only factor that defines the quality of the fine strip products. The finished titanium tube production line must be a system production line optimized by the combination of equipment. If any part of the equipment fails, the product quality of the finished titanium tube will be affected.
3. On the basis of ordinary cold rolling technology, equipped with advanced equipment and excellent employees, the products produced should be regarded as finished titanium tubes for titanium containers.
From the perspective of precision control, product grade, quality requirements, etc., the production technology of finished titanium tubes is not a substitute for ordinary cold rolling technology. However, some cold-rolled narrow-band factories are under the sign of finished titanium tubes. In fact, the products they produce show a “low yield rate” to the users’ needs, which results in unstable product quality for users. It maintains a high yield rate and can provide downstream users with products of different specifications, performances and quantities in a timely manner.
4. The finished titanium tube factory evaluates its scale by capacity.
The precision belt factory can’t be compared with the traditional cold rolling production plant in terms of production capacity, but the high added value of the products reflects the value. For example, the selling price of some fine strip products in Europe is 10 times or even tens of times that of cold-rolled products.
As mentioned above, the finished titanium tube is not a cold-rolled sheet, nor is it a modified material. It is special for the configuration of raw materials, equipment, technology, personnel and management. Fine strip is not a large-scale production, it relies on the added value of technology; while cold rolling relies on the added value of scale, the change of rolled material depends on the added value of processing. Therefore, there are essential differences in terms of equipment, raw materials, varieties, processes, and markets. The production of true high-precision titanium containers and finished titanium tubes is a high-precision, high-tech system engineering, that is: precision high-strength ultra-thin stainless steel strip = precision raw materials + precision equipment + precision production technology + precision organization and Performance control + precision standard → use in precision industry.