Titanium gold plating process for aluminum profiles belongs to the coating technology. It adds pre-plating and electroplating process steps on the basis of the conventional titanium plating process. The pre-plating process is to place the activated plated parts in an aqueous solution of common salt and hydrochloric acid for chemical treatment; The plating solution components […]
Ways and Methods of Introducing Chlorination Titanium Dioxide Process Technology 1. Mainstream chlorination titanium dioxide technology Dupont (Dupont), Kronos, Kerr-McGee (now Tenor), Merrill Lynch (now Cristal Global) and Tioxide (Huntzman) have independently developed their respective chlorination processes. 2. Unlike most chemical production technologies, these internationally renowned chlorination titanium dioxide process technologies are limited to their […]
TC17 alloy is a near β-type alloy with excellent comprehensive properties. Its nominal composition is Ti-5Al-2Sn-2Zr-4Mo-4Cr (mass fraction,%). The alloy can be forged in the α + β phase region or Forging is performed in the β phase region. It not only has high strength, hardenability and fracture toughness, but also has good heat stability, […]
Titanium is widely used in the marine industry because of its good corrosion resistance. Most marine titanium alloys have excellent welding processability. In the application process of alloys, according to the characteristics of various alloys, the working conditions of the structure, the correct design of the joint form, the reasonable selection of welding materials, and […]
Titanium and its alloys have excellent properties such as low density, corrosion resistance, and high temperature resistance. The world titanium industry is undergoing a single model with aerospace as the main market, and a transition to a diversified model focusing on the development of civil fields such as metallurgy, energy, transportation, chemical industry, and biomedicine. […]
Industrial pure titanium belongs to α alloy, which is a close-packed hexagonal (hcp) lattice structure, has good corrosion resistance, mechanical properties and welding performance, and is widely used in aerospace, chemical industry, marine engineering and other fields. Through ECAP deformation, it can remarkably refine the grain, improve the structure, and improve the mechanical properties of […]
Nitrogen in titanium alloys mainly exists in the form of nitrides, such as: TiN, VN, FeN, etc., only a small part of nitrogen exists in the form of atoms. If the nitrogen content in the titanium alloy is too high, it will lead to the loosening of its macrostructure and even the formation of bubbles. […]
617B alloy is a Ni-Cr-Co-Mo superalloy based on solid solution strengthening based on Inconel617 alloy. Al and Ti are added to the alloy to form a small amount of γ ‘phase (4% ~ 5 %) Precipitation strengthening, there is a small amount of M6C phase and Ni2 (Cr, Mo) phase in the aging alloy. Due […]
In the process of hot strip continuous rolling, due to the influence of process parameters such as the temperature of the rolling stock, the speed of the roll, the coefficient of friction, and the difference in roll diameter, asymmetrical rolling phenomena in which the extension of the upper and lower surfaces of the rolling stock […]