Titanium alloy is a high-end, high value-added product in the special steel industry. At present, one of the topics of titanium alloy smelting is to develop a new process to obviously eliminate the defects of various inclusions in the ingot and ensure the uniformity of the chemical composition of the ingot. Conventional vacuum consumable arc […]
1. Preparation before welding The surface quality of the weldment and titanium wire has a great influence on the mechanical properties of the welded joint, so it must be cleaned up strictly. Iron plate and titanium welding wire can be cleaned by two methods: mechanical cleaning and chemical cleaning. 1.1 Mechanical cleaning Welding parts with […]
In general, metal cutting refers to cutting steel and cast iron. However, in today’s workshop, we are facing other materials, such as stainless steel, iron-based and non-iron-based (such as titanium alloy) heat-resistant alloys and high-temperature alloys. There is a big difference between these materials and traditional steel parts, it is they that embodies the true […]
The processing cost of more than 60% of the total cost is the focus of research on cost reduction in various countries. In the production process of titanium parts and components, not only the process is complicated, but also a large amount of residual titanium is produced during the production process, and the production cycle […]
Titanium alloy materials are difficult to process materials, poor thermal conductivity, easy to stick with tools, there is a strong notch sensitivity, will produce a strong work hardening during the rolling process. In actual production, there are a series of problems in the rolling of full teeth. First, after the full tooth shape squeezes the […]
Titanium has a low thermal conductivity and is difficult to heat. Generally, when the surface heating method is used, the heating time is quite long, and when the large billet is heated, the cross-sectional temperature difference is large. Unlike the thermal conductivity of copper, iron, and nickel-based alloys that decreases with increasing temperature, the thermal […]
Titanium alloy melting technology. Developed cold bed furnace smelting technology, including electron beam cold bed furnace and plasma cold bed furnace technology. At present, the smelting of the cold bed furnace has reached a commercial level, which can melt ingots weighing up to 25 tons. It can produce high-quality titanium and titanium alloy ingots without […]
Titanium has a low thermal conductivity and is difficult to heat. Generally, when the surface heating method is used, the heating time is quite long, and when the large billet is heated, the cross-sectional temperature difference is large. Unlike the thermal conductivity of copper, iron, and nickel-based alloys that decreases with increasing temperature, the thermal […]
Titanium gold plating process for aluminum profiles belongs to the coating technology. It adds pre-plating and electroplating process steps on the basis of the conventional titanium plating process. The pre-plating process is to place the activated plated parts in an aqueous solution of common salt and hydrochloric acid for chemical treatment; The plating solution components […]
In the extrusion production of aluminum-titanium alloy profiles, common defects are relatively intuitive, such as bending, twisting, deformation, slag inclusion, etc. The defects of the adsorbed particles are more difficult to find without careful observation or touching. The harm is: in the production process of electrophoresis and spraying profiles, it is difficult to remove them, […]